CEN Racing MT Series RTR 4WD Monster Truck with Ford B50 Body

This is the CEN Racing FORD B50 4WD 1/10 Scale Ford RTR Monster Truck. Based on a real truck, this is an officially licensed 1979 Ford F600 crew cab front end with a 1979 Bronco rear bed! The headlights and light bar have built in buckets, and are 3mm LED ready! Wheelie bar included. Hobbywing 40A waterproof ESC & Savox servo are standard. A realistic full roof rack and side mirrors are some of the awesome details and killer innovations.

ESC -40A WP-1040-Brushed (Powered by HOBBYWING):
Water-proof and dust-proof for all weather
Built-In Capacitor Module
Automatic throttle range calibration
Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
Over-Heat protection and throttle signal loss protection
Easily programmed with jumpers
Deans Connector

Motor -RS-550 High Torque Motor (Powered) By Mabuchi Motor

Servo -12Kg Servo (O.E.M. by Savox):
4.8V 0.26 sec/60deg, 10.0 kg-cm
6.0V 0.23 sec/60deg, 12.0 kg-cm
25T Horn Gear Spline

Radio System – Pistol-Grip Mod-3S 3 Channel Transmitter:
Digital Trimming
Steering Dual-Rate (ST D/R) Adjustment
End Point Adjustment (EPA)
Build in Failsafe
Power Alarm Transmitter Model #: 82190 Frequencies: 2.4GHz

Chassis:
DVP (Dual Vertical Plate) Chassis Design
Sealed Receiver Compartment
Easy Access/Quick Release Battery Tray
Battery Tray Size 146x50x25mm
Adjustable Wheelie Bar Ready (w/Ball Bearing)
Full Precision Ball Bearing Support
Adjustable Turnbuckles -Harden Steel Steering Drag Link
Fully Equipped with Allen Hex Screws
Adjustable Body Post
High Torque Servo Saver
Optional 4-Wheel Steering Design

Suspension:
Sway Bar and Wheelie Bar Included
8 Big Bore Oil Filled Coil Over Shocks
Aluminum Anodized Shock Caps -10mm over size shock body with 3mm hardened steel polished shaft
Stiff Hard Racing Spring
Fixed Wheelbase Ride Height Adjustable with pre-load
Realistic 4-Link Suspension design

Drivetrain:
Slipper Drive System
4 Wheel Drive
Center Shaft Drive Train for more power transferred to the wheels
Hight Efficient Transmission System
Wide Range Easy Changeable Gear Box Design
Sealed transmission eliminates dirt and dust substances to get in
Sealed Axle housing
5mm Hardened Steel Axle shaft
Differential Center Locker Front/Rear Planetary Gear Type
Ring & Pinion 30/15T

Specifications:
Length: 16inch (405mm)
Width: 12.20inch (310mm)
Wheelbase: 10.82inch (275mm)
Ground Clearance: 3.14inch (80mm)
Weight: 4.85 lb. 2.2kg
Deep Dish 2.2-inch (55mm) Monster Truck Wheels, V-Pattern Tire 55x136x74mm+

Requires:
NiMH or 2S or 3S LiPo Battery with Deans or T-Type Connector
Battery Charger

Battery and Charger not included