RC4WD 1/10 Miniature BendPak XPR-9S Two-Post Auto Lift – Grey

Licensed 1/10 BendPak XPR-9S Two-Post Auto Lift. These have been Officially Licensed by the BendPak company and are only available from RC4WD and our Dealers. Complete with battery and fully functional allowing for that ultimate scale garage look.

July 2019 UPDATE: Color is now the new licensed Gray Color

Specifications:
Billet Aluminum Lift Towers, Lift Arms and Lift Base
Steel Lift Screws
Lifting Capacity: 22lbs/10kg
The Overall Height: 16.50in / 420mm
The Overall Width: 16.90in / 430mm
Column Width: 1.57in / 40mm
Arms Width: 0.63in / 16mm
Lift Height Max: 9.45in / 240mm
Time To Full Rise: 50 sec
JST-PH 2.0 Battery Plug Connector

What’s Included:
1x RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift (Grey)
1x Battery Pack
1x BendPak Decal Sheet
1x Warning Decal Sheet
1x Instruction Manual

Instruction Manuals:
Click here to download.

Required Parts:
Charger needed with an appropriate plug to charge the included NIMH battery pack

Replacement Hardware:
Steel Flat Head Cap Screw M2 X 4mm (Z-S1516)
Steel Flat Head Socket Cap Screw M3 x 8mm (Z-S0649)
Steel Button Head Cap Screws M3 x 4mm (Z-S0745)
Steel Button Head Cap Screws M3 x 8mm (Z-S0652)
Steel Socket Head Cap Screws M2 x 10mm (Z-S0849)
Steel Socket Head Cap Screws M2 X 6mm (Z-S0611)
Steel Flat Head Cap Screws M3 x 10mm (Z-S0860)
Steel Socket Head Cap Screws M2.5 x 10mm (Z-S1290)
Steel Socket Head Cap Screws M2.5 x 6mm (Z-S0855)
M3 X 3mm Set screw (Z-S0124)

Notes:
Adjustable Arms to fit many different vehicles

BendPak is a registered trademark of the BendPak XPR-9S company. The BendPak logo is property of BendPak XPR-9S and used under license by RC4WD.

*Shown with RC4WD Trail Finder 2 RTR w/Chevrolet Blazer Body Set (Limited Edition) (Z-RTR0035) for example (Not Included)